Model AT100SP Fully-Automatic Thermoplastic Spray Plastic

Technical Specification

Model AT100SP Fully-Automatic Thermoplastic Spray Plastic

Engine

-Powered by single cylinder, Honda 13 hp air-cooled petrol engine. -Electric starter system with alternator and necessary electric gadgets such as volt meter, starter key and charging 12V alternator.

Drive system

-Hydrostatic drive -special design from Italy for road marking machine. - Driving speed 0-9km/h. -Marking speed 0-3km/h (for spray plastic application only)

Air compressor

-Finn air compressor from Italy. -700lit/M, air delivery at 10 bar working pressure.

-100litres (200kgs) capacity paint tank complete with hydraulic stirrer. -Fitted with temperature gauge and high pressure burner. - Oil jacketed tank with indirect heating system, thermal oil pump attached. - Inner tank and outside cover are made of stainless steel plate.

Machine Chassis

-Heavy-duty chassis made of special mild steel channels. -Designed to withstand damages during operation on the rough and tough road surface.

Glass bead system

-Swiss made Special Glass Bead spray gun for road marking application. -Gun with changeable nozzles according to the line width. -Specially designed for spraying beads accurately and precisely. -20kg capacity glass bead pressurized container.

Gas system

-Well distributed LPG gas system with safety regulator. -LPG burner for paint tank and screed shoes . -DC temperature control sensor of Danfoss make to control the flame. -One high pressure hand torch attached with the machine.

Wheels

-Two heavy duty wheels in the front axle for steering and two wheels in the rear, with hydraulic motors attached incorporated with parking brake.

Spray Gun

-World best Swiss made special spray gun with oil jacketed system.

Computer

-Sweden made Special designed skip line device to control the spray gun and glass bead spray gun opening according to desired line paten. -It works automatically according to the machine speed.

Steering

-Manually operated steering system for firm operation.

Pneumatics

-World class brand complete pneumatic system. -Pneumatic operation can be done with solenoid or manually. -Designed with auto release valve. -Complete with water filter, lubricator, and flow regulators.

DC electric

-12V DC electric circuit with emergency control button with other important electrical components according to the road safety standard. -Signals light, parking light, working lights, horn, revolving lights, sport light, safety meters, battery protector and other necessary gadgets.

Hydraulic

-Hydraulic pump attached to the axial piston pup for paint tank stirrer. -Complete hydraulic power pack wit 50 litres capacity hydraulic tank. -Standard filter system and oil cooling system provided.

Optional Extras

GPRS and GPS for machine positioning
Daily report transfer USB port for the computer.
Cold paint tank with spray gun for pre-marking system

Dimension

Height : 1600MM
Width : 1500mm
Length : 2400mm
Weight : 900kg

Others : All specification and accessories such as pneumatic system, DC electric system, LPG, hydraulic system and other mechanical systems are as per international norms and standards.

Note: We reserve the right to change the specification and design without notice for product improvement. We have preserved the original specification of road marking machines used world wide, especially in countries like Japan, Malaysia and Singapore.

Machines fabricated based on our continuous research and observation on Indian roads. It is our commitment to overcome the problems faced by the other conventional road marking machines which are now fabricated in India like mushroom. WE are well supported by trained fabrication and after sales team which are backed by foreign technical expert.