Model ATM-250S Truck Mounted Screed Thermoplastic Road Marking Truck

Technical Specification

Model ATM-250S Truck Mounted Screed Thermoplastic Road Marking Truck

Truck

TATA 407 - 20 bags capacity pre-heater - 6 bags melted paint storage tank for marking TATA ACE - 12 bags capacity pre-heater - 4 bags melted paint storage tank for marking

-Standard air jacketed pre-heater attached on the truck with a capacity of 30 bags, 20 bags or 12 bags as the minimum size for truck mounted operation. -Hydraulically operated stirrer system for mixing the paint. -Pneumatically operated tank door, open/close operation by pneumatic hand control valves.

Power Pack

Hydraulic power pack -Hydraulic power pack for paint tank stirrer and melted paint tank stirrer, 2 hydraulic motors. Air compressor -Pneumatic reservoir for activating all the pneumatic valves, air cylinders and spray gun.

Diesel Engine

10 hp diesel engine to activate the air compressor and hydraulic pump.

Glass bead system

Kamber spray gun from Switzerland with adjustable material nozzle

Screed shoes

100mm, 150mm or 200mm screed shoes with pneumatically operated system.

Computer system

Sweden made computer system with manual override system.

Pointer/Guide

Pneumatically operated. Up/Down by pneumatically operated system for easy operation.

Electrical system

12V DC electrical system for the solenoids and safety lighting.

Note : This is a special specification and design recommended for your big projects which you can drive the truck to the work site and operate straight away and drive back upon completing the job in the site.

It is anytime convenient and easy to operate the truck mounted machine. It safes working time and man power.

We can design even bigger truck mounted machines as per your requirement as custom made design.

Note: We reserve the right to change the specification and design without notice for product improvement. We have
preserved the original specification of road marking machines used world wide, especially in countries like Japan, Malaysia and Singapore.

Machines fabricated based on our continuous research and observation on Indian roads. It is our commitment to overcome the problems faced by the other conventional road marking machines which are now fabricated in India like mushroom.

Well supported by trained fabrication and after sales team which are backed by foreign technical expert.

Truck

Pre-heater