Model AT250E Extrusion Thermoplastic Road Marking Machine

Technical Specification

Model AT250E Extrusion

1) Engine

-Kubota V1505T 40hp-4 cylinder water cooled diesel engine. -Electric starter with alternator and necessary electric gadgets such as volt meter, temperature meter and 12V alternator.

- Variable Hydro static pump -special technology for road marking machine from Italy. (from the same supplier for Hofmann-Gemany). - Heavy duty hydraulic motor with parking brake incorporated-latest technology. - Driving speed 0-15km/h. - Marking speed 0-7km/h (for extrusion application only) -Gradient 25% carrying the load of 3500kgs

3) Air compressor

-Finn air compressor from Italy. -1500lit/M air delivery at 10 bar working pressure.

4) Paint tank

-500kg (250 litres) capacity paint tank complete with vertical stirrer-hydraulically driven. -Fitted with temperature gauge for paint and thermal oil. -Oil jacketed tank with proper insulation and safety system. -Inner tank is made of stainless steel plate and covered with m.s plates. -High temperature centrifugal oil pump to circulate the oil from the main tank to extruder.

5) Chassis

-Heavy-duty chassis made of special mild steel channels. -Designed to withstand impact during operation on the rough and tough road surfaces, especially in Middle East and African countries.

6) Extrusion die

-Special extrusion die from Germany-Winter -100mm up to 400mm line at a single operation. -Pneumatically adjustable and easy selection of size from the driver seat. -10 – 40 cm width depending on the requirement. The extrusion die may be used for the application of various types of flat and broken lines, single and double lines of different widths, -Electronically controlled hydraulic motor controls the flow of paint from the tank to the extrusion die through a special oil jacketed chamber.

7) Glass bead gun

-Model PH84 Kamber. Special Glass Bead spray gun from Switzerland. -World class glass bead spray gun with changeable nozzles. -Specially designed for spraying beads accurately and precise spreading. -1 unit of 100kg capacity glass bead container- pressurized with both side outlet.

8) Burner system

-High pressure LPG burner system form Italy-complete assembly. -Danfoss DC temperature control sensor to manage the flame. -Complete high pressure hand torch attached with the machine.

9) Wheels

-Two special wheels in the front axle for steering and two wheels in the rear attached to hydraulic motors, attached with parking brake. (Italian made specially for road marking machines)

10) Computer

- Luno (Sweden) skip line device to control the extrusion die and glass bead spray gun according to desired line length. -It works automatically according to the machine speed with encoder reading.

11) Steering

-Heavy-duty power-assisted steering system for firm operation.

12) Pneumatic

-World standard pneumatic accessories attached with full specification. -Combination of Cammozi(Italy) or SMC(Japan) -Designed with auto release valve and safety protection valves. -Complete with water filter, lubricator, and flow regulators. -10 bar working pressure.

13) DC electric

-12V/60Amps DC electric circuit with emergency button complete with other important electrical components according to the road safety standard. -Signals light, parking light, working lights, horn, revolving lights, sport light, safety meters, battery protector and other necessary gadgets.

14) Hydraulic

-Twin Hydraulic tandem pump attached to the axial piston pump. One for paint tank stirrer system and one for thermal oil pump spinning. -Complete hydraulic power pack with 75 liters tank capacity with complete accessories. -Standard suction and return filters, hydraulic oil cooling system with 12V fan.

Optional Extras

Sir Conditioned driver cabin
GPRS and GPS for machine positioning
Daily report transfer USB port for the computer.
Cold paint tank with spray gun for pre-marking system

Dimension

Height : 2500mm (2.5m)
Width : 2000mm (2.0m)
Length : 3600mm (3.6m)
Weight : 3500kg

Note: All specification and accessories such as pneumatic system, DC electric system, LPG, hydraulic system and other mechanical systems are as per international norms and standards.

Note: We reserve the right to change the specification and design without notice for product improvement. We have preserved the original specification of road marking machines used world wide, especially in countries like Japan, Malaysia and Singapore.

Machines fabricated based on our continuous research and observation on Indian roads. It is our commitment to overcome the problems faced by the other conventional road marking machines which are now fabricated in India like mushroom . WE are well supported by trained fabrication and after sales team which are backed by foreign technical expert.